CS-2200 Icom IC-2200H Programming Software
CS-2200 Icom IC-2200H Programming Software >>> https://urluso.com/2ttxFT
How to Program Your Icom IC-2200H Radio with CS-2200 Software
If you own an Icom IC-2200H radio, you may want to program it with the CS-2200 software from Icom America[^1^]. This software allows you to set up the radio for analog and D-Star operations, as well as customize the memory channels and menu options. You can also access repeater information from around the world with a few clicks. In this article, we will show you how to use the CS-2200 software and a USB-29A cable from RT Systems[^2^] to program your IC-2200H radio.
What You Need
An Icom IC-2200H radio with an optional D-Star module installed (if you want to use D-Star features)
A Windows or Mac computer with the CS-2200 software installed (you can download it from Icom America's website[^1^])
A USB-29A programming cable from RT Systems (you can order it from their website[^2^])
A 3.5 mm stereo extension cable (optional, if you need more length for the USB-29A cable)
How to Connect Your Radio and Computer
Turn off your radio and computer.
Connect the USB-29A cable to the speaker jack on the back of your radio.
Connect the other end of the USB-29A cable to a USB port on your computer.
If you need more length, connect the 3.5 mm stereo extension cable between the USB-29A cable and the speaker jack on your radio.
Turn on your radio and computer.
The computer should recognize the USB-29A cable as a new device and install the drivers automatically. If not, you may need to download and install them manually from RT Systems' website[^2^].
How to Program Your Radio with CS-2200 Software
Launch the CS-2200 software on your computer.
Select your radio model (IC-2200H) and communication port (USB) from the drop-down menus.
Click on \"Read\" to download the current settings from your radio to the software.
You can now edit the memory channels and menu options on the software. You can use the built-in links to access repeater information from around the world. You can also set up your D-Star channels with your callsign, repeater callsign, gateway callsign, etc.
When you are done editing, click on \"Write\" to upload the new settings from the software to your radio.
You can also save your settings as a file on your computer for future reference or backup.
Tips and Troubleshooting
Make sure your radio and computer are turned off before connecting or disconnecting the USB-29A cable.
Make sure your radio has enough battery power or is connected to a power supply before programming it.
If you encounter any errors or problems during programming, check the following:
The USB-29A cable is connected securely and correctly.
The communication port is set correctly on the software.
The drivers for the USB-29A cable are installed properly on your computer.
The CS-2200 software is compatible with your operating system and radio model.
We hope this article has helped you program your Icom IC-2200H radio with CS-2200 software. If you have any questions or feedback, please feel free to contact us. Happy programming! 9160f4acd4
https://www.jasmeetsanand.com/group/discussions/discussion/95a96b9c-2513-4391-9898-fd946ea4ad3c
https://www.ainfgib.com/group/mysite-200-group/discussion/97f8fdcd-2159-4476-8c6e-27d1ca26e716