CHRYSLER DIAGNOSTIC APPLICATION CDA..epub

What is Chrysler Diagnostic Application (CDA) and How to Use It

Chrysler Diagnostic Application (CDA) is a special diagnostic software for cars of Chrysler Group. It allows you to perform various diagnostic functions, such as reading and clearing fault codes, viewing live data, performing actuator tests, running off board routines, and accessing programming features. CDA works with the following original interfaces: wiTECH VCI Pod, StarSCAN, StarMOBILE. It also possibly works with third-party interfaces from Vector Hardware, such as CANcardX, CANcardXL, CANcaseXL, CANcardXLe, CANboardXL[^1^] [^2^].

In this article, we will show you how to install and use CDA on your PC. You will need a compatible interface device, a vehicle or an ECU to connect to, and an internet connection to access the Diagnostic Workbench[^2^]. The Diagnostic Workbench is a web portal that provides you with the latest software updates, ENG files, and technical support for CDA[^2^]. You will also need to register for access to the Diagnostic Workbench before using CDA[^2^].

How to Install CDA

To install CDA on your PC, you will need to download the latest version of the application from the Diagnostic Workbench website. You can find the download link under the \"Downloads\" tab. The current version of CDA is 6.14[^1^]. You will also need to download and install the drivers for your interface device from the same website. After downloading the files, run the setup.exe file and follow the instructions on the screen. You may need to restart your PC after the installation is complete.

How to Use CDA

To use CDA, you will need to connect your interface device to your PC and to your vehicle or ECU. Depending on your interface device, you may need to change the CAN baud rate or select the correct transceiver cable[^2^]. You can find more information about these settings in the user manual of your interface device. Once you have established a connection, launch CDA from your desktop or start menu. You will see a main window with several tabs and buttons.

The first tab is \"Vehicle Selection\". Here you can select the vehicle model and year that you want to diagnose. You can also enter the VIN number or scan it with a barcode reader if available. After selecting a vehicle, click on \"Connect\" to establish communication with the vehicle's ECUs.

The second tab is \"ECU Selection\". Here you can see a list of all the ECUs that are detected by CDA. You can select one or more ECUs that you want to diagnose by checking the boxes next to them. You can also filter the list by ECU type or name using the drop-down menus at the top.

The third tab is \"Diagnostic Functions\". Here you can access various diagnostic functions for the selected ECUs. You can choose from \"Read Fault Codes\", \"Clear Fault Codes\", \"View Live Data\", \"Actuator Tests\", \"Off Board Routines\", and \"Programming\". Each function has its own sub-menu with different options and parameters that you can adjust according to your needs.

The fourth tab is \"Settings\". Here you can change some settings for CDA, such as language, units, display mode, logging level, etc. You can also update CDA software and ENG files from this tab by clicking on \"Check for Updates\". You will need an internet connection for this function.

The fifth tab is \"Help\". Here you can access various help resources for CDA, such as user manual, FAQ document, technical support contact information, etc. You can also send feedback or report bugs from this tab by clicking on \"Send Feedback\".

Conclusion

CDA is a powerful diagnostic software for cars of Chrysler Group that allows you to perform various diagnostic functions with ease and accuracy. It works with several interface devices that enable communication between your PC and your vehicle or ECU. It also requires an internet connection and registration for access to the Diagnostic Workbench website that provides you with software updates, ENG files, and aa16f39245